Integral Bonnet Series
- Bar stock or Forged Body construction
- Straight or Angle pattern available
- Standard Working Pressure 6000 PSI with PTFE packing. Grafoil offered for higher temperatures.
- Standard NPT End Connections. BSP / BSPT / ANPT/Tube OD available on request.
- Heat Code traceability.
- NACE MR-0- 175 Compliant materials available on request.
- All Components are Ultrasonically cleaned prior to assembly.
- Pneumatic seat test is performed at 1000 PSI. Medium – Nitrogen gas.
- Hydrostatic seat test is performed at 1.1 times the working pressure.
- Hydrostatic shell test is performed at 1.5 times the working pressure
- All the Valves are 100% Factory Tested.
